Tag Archives: pumpkin

“One-a-Day” Recycling Challenge – Day 25: Problems with Pumpkins

How I hate having ideas but not being able to bring them to life (How apt – I feel a bit like Dr Frankenstein today; although my monster didn’t even make it off the slab).

I wanted to make a copper pumpkin, built up in layers with the top layer having the face cut out and so I could then give the whole thing a patina but polish it away in the cut-outs so that they would glow with the polished ‘raw’ copper.  I thought  it would look good that way, and so went about designing it.

Well, it turns out that soldering two pieces of copper together (in the freezing cold – I could see my breath as I was working!) wasn’t too bad; but then trying to solder that to another piece was nigh on impossible!  I don’t think my blow-torch could get the metal hot enough for the solder to flow smoothly.  The cold probably didn’t help either.  After a few tries and some time in the pickle in-between (to take any old flux and fire-scale off before trying again), I was ready to throw the piece out the window (without opening the window first!).

The model of restraint that I am (*cough*), I decided instead to sit down and rethink the design.  I liked the shape and the copper, but how to get the face of the pumpkin right?  Well, it turned out to be as simple as cutting the shapes out of silver and soldering them on the basic shape of the pumpkin (single layer of copper).  The silver solder leaked out slightly around the pieces of silver sheet and instead of sanding it away, I decided to keep it as it gave the pumpkin a sort of silvery glow around it’s features – very spooky!

To get the 3D feel without the layers, which proved so tricky in my first attempt, I used a hammer with a small flat-head screwdriver and did a very (deliberately) rough repoussé  technique where the pumpkin’s curves would be.

The pumpkin polished up well with the silicon wheels and then I heated the whole thing very gently to give the bright copper a more orange patina.  In fact, the colours were a very beautiful pink and orange but after the Renaissance Wax was applied, the colours dulled to a more all-over pumpkin orange.

So here is my pretty pumpkin, all ready to be a pendant or a fob on a key chain. He’s so light-weight – just don’t tell him how simple he is too.

Advertisements