Tag Archives: Lord of the Rings

“One-a-Day” Recycling Challenge – Day 30: Leaves of Gold

I sang of leaves, of leaves of gold, and leaves of gold there grew…”  so starts Galadriel’s Song of Eldamar by J.R.R. Tolkien.

I know the leaves in my earrings are actually based on those of the rose and not from trees, as in the song; but to me they do look like they belong in Tolkien’s world.  I can imagine them being worn by an Elven maiden, or a hobbit wife or daughter.  They are so light and delicate, beautiful in their simplicity and evocative of nature (so maybe good for a garden fairy too?).

My whole household are Tolkien fans (my hall even has the door to Moria painted in silver on the under-stairs doors and the White Tree of Gondor half-way up the stairs on the half-landing wall) and I have a feeling that these earrings are only the beginning of the Tolkien/LOTR films inspired jewellery.

The recycling part of these earrings is mostly in the form of the pure silver PMC which the leaves themselves were made from.  When PMC dries out, it can still be re-used but the dried ‘clay’ needs to be ground up really fine (I use an electric coffee grinder) and then all impurities sifted out (I use a fine mesh bag which originally I bought to put jewellery in when sold, but it works really well for this too).  The powder is then mixed with a few drops of water till it reforms into a ‘clay’ ball and then I roll it out, between sheets of greaseproof paper, again and again until it becomes more like the ‘clay’ that comes out of the original packet.

Well, I find that this recycled PMC3 ‘clay’ is really good for using with my moulds and today I used one, originally for cake decorating, to make my little leaves.

The gold on the leaves is pure 24k gold that has been purchased as a powder and then made into a thin paste with glycerine and water.  I used a silicone ‘brush’ tool to paste a layer onto the freshly fired pure silver and then after it dried, I torch-fired the pieces to bond the gold into the silver.  It’s not like plating as the gold is actually bonded into the silver rather than just coating it.

I had wanted the gold to give the impression of texture on the leaves, like those turning gold in Autumn, so the layer of gold paste was applied in patches rather than all over.  The veins of the leaves were also left silver, which gave some definition.  The gold has been only applied to the front of the leaves, as in nature rarely are both sides of a leaf the same shade/colour, and it also seemed overkill to cover the whole leaf in gold.

The beads are gold-filled (also known as rolled-gold, a thicker layer of gold than ordinary gold-plating and also more durable) with a ridged texture and the golden crystals are Fire-polished Czech crystal rhondelles the colour of light golden honey.

The ear-wires and wires that hold the beads, are all sterling silver, but I suppose they could be rolled-gold if need be (the only thing is that rolled-gold or gold-filled wire has a metal core which shows when it is cut and so looks odd when used for ear-wires or anywhere where you can see the cut end).

Elven leaf earringsBy the by, the picture was taken in my kitchen – which is all Alice in Wonderland themed.  That’s a hand-painted picture of the Cheshire cat which is just above one of my shelves, just about where his head would be if he was sitting there.  I’ve got lots more hand-painted images on the walls,  I’ll have to do an Alice inspired piece of jewellery so I can post more pictures of my pretty kitchen!

 

“One-a-Day” Recycling Challenge – Day 18: My Own Cheshire Cat

My boy Frodo is my own Cheshire cat.  Not only is he stripy and is a pale orangey-pink, he was also born in Cheshire and he has the cutest smiley mouth (it really does turn up at the corners and looks like he’s smiling).

Now Frodo has always been important but even more so now that he has CRF (Chronic Renal Failure or Kidney disease to the rest of us).  I’ve got lots of sketches of him as he is quite the laid-back kitty, and I decided to turn one into a brooch design.

As he is such a pale coppery pink, what better than to make his brooch out of copper.  I used the same technique as with yesterday’s bat pin but with silver wire on copper sheet.  I won’t go into the same details (go read my bat post!) but I will say that after cutting out all the pieces, I soldered the face first, the leg next and then soldered both to the body.

I don’t know if it was just me, but I had way more trouble soldering silver onto copper than copper onto silver.  I think that the melting point of copper is lower (don’t quote me on that until I can go check) but anyway it was a headache I could do without and I think I spent way too much time soldering and problem-solving because of it.

I don’t have any way of cutting tiny circles, except by hand, so I decided to take two of my silver beads (they were flattish rather than round to begin with) and hammer them flat.  I also filed into the middle to make the cat-eye shape I wanted.

The brooch pin was made by coiling silver wire around a thin mandrel about 4 times (you could use a thin knitting needle or a metal skewer as long as it’s cross-section was round) and soldering the last loop of the coil to the back of the brooch.  The unsoldered loops of the coil are then (as one) pulled 90° to the side (making sure the tail of the pin is uppermost) and then the pin is trimmed to size and the end filed to a point.  I don’t push the pin down horizontal to the back until after I have added the catch.  The catch was added the same way but the wire had only one loop which was soldered in place.  The tail of the wire was then cut to size and curled round, leaving a gap for the pin to tuck under and be held in the curve of the catch.

I wanted the silver to have a high shine but the copper to be more muted.  With this in mind, I  haven’t tumbled this piece but polished by hand and with silicon polishing wheels on the rotary “drill”.

As I type, it’s 1am and my Frodo brooch is still a little polish away from being finished.  I will post this and then add the photo tomorrow, when it’s all shiny and pretty.  I’ll also add a photo of the pretty boy it’s based on.

BTW, just in case anyone was wondering … Frodo was originally a nickname for him when he was a little kitten and we were trying to think of a proper name.  He has the hairiest, tufty-est paws I had ever seen (he’s half Maine Coon) and he ate at least seven breakfasts a day.  The name just stuck and forever after, he has been known as Frodo (but more often as Mr Frodo or Frodo Bun (short for bunny – a term of endearment, just not a species-correct one).